The Boot Console Interface
Displaying and Setting Paths
1Enter
The system displays the Primary Path information, as shown:
PRIMARY PATH is now [ SCSI.6.0 ]
Key Device Path
---
1 SCSI.6.0 QUANTUM FIREBALL1050S
2 SCSI.5.0 QUANTUM FIREBALL1050S
... .........................................
0 Previous Menu
66Rescan for Boot devices
77Reset the System
To set the PRIMARY PATH, Press Key, then press [Enter/Return]
2Update the path by typing in a key number from the list that represents your selection of the path/device.
For example, if you want to configure the boot console to boot from
PRIMARY PATH is now [
3Press 0 Enter to go back to the Path Configuration menu which confirms the new selection:
==== PATH CONFIGURATION ======================
PRIMARY PATH is now [
CONSOLE PATH is now [ GRAPHICS 1 ] KEYBOARD PATH is now [ PS/2 (0) ]