Accessories Installation

PMC Bridge Adapter and Expansion Adapter

10Remove the EMI gaskets from the bezel of the board computer, if in- stalled.

11Install the PMC bridge adapter (as shown in Figure 2-10)or the bridge adapter with expansion adapter (as shown in Figure 2-11)onto the board computer. Align the GSC connector first, then the tabs on the front panel, and push the boards together. There are four screws that secure the front bezel, and four screws that secure the VME connectors.

PMC Bridge Adapter

 

with 2 PMC Cards Installed

GSC Connector

 

Tabs (4)

 

Connector

Front Bezel Screws (4)

Screws (4)

Figure 2-10

Installing the PMC Bridge Adapter onto the Board Computer

2-19