The Boot Console Interface
System Configuration Menu
The general sequence of operations in this menu is:
2Type 1 to choose BPN configuration.
3Type in the data (CPU data, Anchor and AM code as one line, for example as indicated by the “value examples” listed below the “AM code” line.
4Press Enter to exit this menu.
There are 3 data values for BPN, separated by spaces. Values not entered are ignored. Values entered or shown with a “0x” prefix are hex numbers; otherwise they are decimal.
5Typing 2 Enter at the SYSTEM CONFIGURATION MENU puts the fol- lowing BPR sub menu on the screen:
Current BPR configuration:
VME address | = | 0x00000000 |
AM code | = | 0x00 |
values example: 0x12345678 0x0d
Type value(s), then press [Enter/Return]
The general sequence of operations in this menu is:
6Type in the data (VME address, AM Code) as one line, as indicated by the "value example" listed below the "AM code" line.
7Press Enter to exit this menu.
There are 2 data values for BPR, separated by spaces. Values not entered are ignored. Values entered or shown with a 0x prefix are hex numbers; otherwise they are decimal.
An arbitrary number of commands may be added to the debug environment. You can also add items to the firmware, hardware, and system configuration menus.