Typical Installation in a VME Card Cage

Keyboard and Mouse

Keyboard and Mouse

This section provides step-by-step instructions for connecting a keyboard and mouse to your Model 743.

1Unpack your new keyboard and place it near your board computer.

2Plug the keyboard cable connector into your board computer at the PS/2 connector labeled PS/2 0 Kbd.

NOTE:The keyboard must be connected to PS/2 0 to be operational.

3Unpack your new mouse and locate the mouse’s black rubber ball in the mouse box.

4Remove the ball plate from the bottom of the mouse. Insert the ball and replace the ball plate.

5Plug the mouse cable connector into your board computer at the PS/2 con- nector which is labelled PS/2 1.

3-5