Accessories Installation

PMC Bridge Adapter and Expansion Adapter

16Plug in the power cord(s), and then turn on the power for the VME card cage and boot the operating system.

17Log in as root and use the SAM utility to configure the HP-UX kernel for PCI support. (PMC cards require PCI drivers in the kernel.)

18When SAM has started, choose the Kernel Configuration ->menu.

19From the Kernel Configuration menu, choose Drivers

20From the Drivers menu, select GSCtoPCI Driver.

21Go to the Actions menu and select Add Driver to Kernel.

22Go to the Actions menu and select Create a New Kernel.

23When the new kernel is built, SAM asks if you want to move the kernel into place and reboot. Choose Yes.

The system reboots with the PCI driver loaded.

2-25