Accessories Installation

PMC Bridge Adapter and Expansion Adapter

keying pin. See Figure 2-7.

O-Ring Gasket

PMC Card

Bezel blank

Site 4

Site 3

Expansion Adapter

Figure 2-7

Installing a PMC Card onto the Expansion Adapter

7The bridge adapter should NOT be assembled to the board computer. If it is, remove it by reversing the steps shown in Figure 2-10.

8Remove the four screws from bridge adapter VME connectors, and re- place them with the four standoffs included in the expansion adapter kit. See Figure 2-8.

2-16