Connecting Cables
Connecting a Single Monitor,
CAUTION: Some
HCRX Graphics | |
Connector | Connector |
GSC 3 x 5
Graphics
Connector
Note:
Figure | Connecting a Monitor to HCRX, GSC, or |
1
a Plug the small connector of the conversion video cable into the video connector of your board computer, or the connector on your HCRX board.
b Connect the monitor cable to the conversion cable.
c Connect the monitor cable to your monitor as follows:
•Red to R (RED)
•Green to G (GREEN)
•Blue to B (BLUE)
2GSC graphics cards:
a Connect the monitor cable to the GSC card connector.
b Connect the other end of the cable to the monitor as specified in the previous step.