Hewlett-Packard’s system certification tests were conducted with HP-supported peripheral devices and HP shielded cables, such as those you receive with your computer. Changes or modifications not expressly approved by Hewlett-Packard could void the user’s authority to operate the equipment.

Australia EMC Standards

This equipment has applied for and received approval to display the Austra- lian C-Tick mark according to the standards of AS/NZS 2064.1/2:1992 and AS/NZS 3548:1995.

VCCI Class A ITE

Electrostatic Discharge (ESD) Precautions

Electrostatic charges can damage the integrated circuits on printed circuit boards. To prevent such damage from occurring, observe the following precautions during board unpacking, installation, and configuration:

•Stand on a static-free mat.

•Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your body to ground.

•Connect all equipment together, including the static-free mat, static strap, routing nodes, and peripheral units.

•Keep uninstalled printed circuit boards in their protective antistatic bags.

•Handle printed circuit boards by their edges, once you have removed them from their protective antistatic bags.

Preface-3