The Boot Console Interface
Displaying the LAN Station Address
Displaying the LAN Station AddressThis section provides instructions for displaying the LAN station address for your system.
The LAN station address (“LANIC ID”) of your system is the label that uniquely identifies the LAN connection for it at the link level (the hardware level). It is sometimes necessary for you to supply this address to other users. For example, if your system is to become a member of a cluster, the cluster administrator needs to know your LAN station address to add your system to the cluster.
Before booting your system, follow these steps to display your system’s LAN address:
1From the Main Menu, select Hardware Information by entering:
6Enter
The system displays the Hardware Information menu, as shown.
==== HARDWARE INFORMATION ====================
Machine Model | 9000/743 |
System Board Serial No. 1234567890 | |
Cache size | 128 Kbytes 128 Kbytes |
Key Component
---
CPU |
|
| Rev. 2.1, Freq. 100 MHz |
RAM |
|
| 16 Mbytes |
1 | I/O | ASIC |
|
2 | VME | ASIC | Rev. 2 |
GRAPHICS | 1 |
GRAPHICS | 2 |
Key Operation
..............................................
0Previous Menu
77Reset the System
press Key, then press [Enter/Return]