LISTSPF

The LISTSPF command produces a listing of input and output spooled ￿les. The information re￿ects the status at the time y ou enter the command and always appears on the standard list device.

Syntax

 

 

 

 

 

 

spoolid

 

 

 

;DETAIL

LISTSPF ￿ 2 IDNAME= 3￿(spoolid

2

,spoolid

3

. . . ) ￿ ￿￿ ;STATUS ￿

 

 

 

 

Parameter Definitions

 

 

 

 

IDNAME

Speci￿es one or more spool ￿le IDs. #I nnn represents input

 

spool ￿les and #O nnn represents output spool ￿les. The

 

spooling subsystem assigns these IDs when the spool ￿les are

 

created.

 

 

 

 

Rules for use of this parameter are as follows:

Use # optionally, but if you use it, mak e sure to include an I or O with the # sym bol. #O is assumed if y ou do not specify either #I or #O.

Use @ to specify all spool ￿les.

Use I@ to specify all input spool ￿les. All input spool ￿les reside in @.IN.HPSPOOL.

Use O@ to specify all output spool ￿les. All output spool ￿les reside in @.OUT.HPSPOOL.

You must have account manager (AM) capability when specifying O@ in order to displa y all output spool ￿les created by users in the same accoun t. Similar rules apply to I@ and @.

You must have system manager (SM) or system supervisor (OP) capability when specifying O@ in order to displa y all output spool ￿les on the system. Similar rules apply to I@ and @.

2-138 MPE/iX Commands