RECALL/4Ctrl5A RECALL

The RECALL/ 4Ctrl5A RECALL command displays all pending console resource request messages. You reply to pending resource requests b y using the REPLY command.

Syntax

From a terminal:

RECALL

From the console:

4Ctrl5A RECALL

Parameters

None.

Operation Notes

Usage

You can enter this command from a session, a job, a program, or in break mode. Pressing 4Break5 does not a￿ect this command.

You can enter the RECALL command only if y our system administrator has used the ALLOW command or ASSOCIATE command which permits you to enter this command.

Di￿erences between RECALL and 4Ctrl5A RECALL

Both of these commands function iden tically except that y ou can enter 4Ctrl5A RECALL only from the console and not from a job or program. The = sign appears when you press 4Ctrl54A5.

Pressing these keys enables you to enter certain commands on a console from which another process (suc h as STORE ) is currently running. You should only use the 4Ctrl5A RECALL command if the RECALL command cannot be used.

2-200 MPE/iX Commands