HP n400c manual Hardware Guide

Computer Upgrades and Add-ons

11.To add a new modem/NIC board, align the keyed end of the board with the keyed area of the modem slot. Carefully insert the board into the modem slot 1 at a 45-degree angle and press down on the board 2. When properly seated, the retainer latches snap into place.

✎The board connectors are keyed (notched) to ensure correct positioning.

12.Plug the internal modem-to-RJ11 cable 3 (located inside the computer) into the connector on the modem/NIC board.

13.Replace the palm rest and reinstall the screws.

14.Connect the modem or network cable to the appropriate jack on the computer and to the wall. Refer to “Connecting a Modem or NIC” in Chapter 7.

Hardware Guide 8–15