HP NonStop NS manual Adapters and Modules Monitoring and Recovery, When to Use This Section

8

I/O Adapters and Modules:

Monitoring and Recovery

When to Use This Section on page 8-1

I/O Adapters and Modules on page 8-2

Fibre Channel ServerNet Adapter (FCSA on page 8-2

Gigabit Ethernet 4-Port Adapter (G4SA) on page 8-2

4-Port ServerNet Extender (4PSE) on page 8-3

Monitoring I/O Adapters and Modules on page 8-3

Monitoring the FCSAs on page 8-4

Monitoring the G4SAs on page 8-5

Monitoring the 4PSEs on page 8-7

Recovery Operations for I/O Adapters and Modules on page 8-7

Related Reading on page 8-8

When to Use This Section

Use this section for monitoring and recovery information for the Fibre Channel ServerNet adapters (FCSAs) and the Gigabit Ethernet 4-port adapter. Information on ServerNet/DAs, the IOMF2 enclosure, and the I/O adapter module (IOAM) is available in NonStop S-series documentation.

For information about the disk drives or tape drives supported on a ServerNet/DA for your H-series RVU, refer to the H-Series Highlights and Migration Planning Guide.

Note. Starting with H06.08, new Integrity NonStop NS14000 and NS1000 servers are shipped with VIO enclosures instead of an IOAM enclosure. VIO enclosures provide the same functionality as IOAM enclosures. The monitoring and recovery principles described in this chapter are essentially the same for VIO enclosures; however, the components and OSM object names vary. For more information on VIO enclosures, see:

•

•

•

•

Versatile I/O (VIO) Manual

NonStop NS14000 (or NS1000) Planning Guide

NonStop NS14000 (or NS1000) Hardware Installation Manual OSM Service Connection User’s Guide

HP Integrity NonStop NS-Series Operations Guide—529869-005

8-1