HP NonStop NS manual Spooler Warm-Start File, TMF Warm-Start File, Obey $SYSTEM.STARTUP.SPLWARM

Creating Startup and Shutdown Files Spooler Warm-Start File

Spooler Warm-Start File

This example command file warm starts the spooler.

After the spooler has been brought up, the printer devices should be in the WAITING state. This file can be invoked automatically from the STRTSYS file, or you can invoke it by using the following TACL command:

> OBEY $SYSTEM.STARTUP.SPLWARM

comment -- This is $SYSTEM.STARTUP.SPLWARM

comment -- This file warm starts the spooler, leaving all jobs intact.

SPOOL / IN $SYSTEM.SPL.SPL, OUT $ZHOME, NAME $SPLS, NOWAIT, PRI 149, & CPU 1/0

SPOOLCOM; SPOOLER, START

comment -- check to see that the spooler started successfully

SPOOLCOM; SPOOLER, STATUS

TMF Warm-Start File

This example command file warm starts the TMF subsystem.

This file can be invoked automatically from the STRTSYS file, or you can invoke it by using the following TACL command:

> TMFCOM / IN $SYSTEM.STARTUP.TMFSTART, OUT $ZHOME /

--This is $SYSTEM.STARTUP.TMFSTART

--This file warm starts the Transaction Management Facility (TMF) subsystem

--and checks to see if TMF started successfully.

START TMF;ENABLE DATAVOLS *;STATUS TMF;EXIT

TCP/IP Stack Configuration and Startup File

Configuration data for NonStop TCP/IP (conventional TCP/IP) processes is not added to the configuration database. Therefore, TCP/IP stacks must be both configured and started for each LAN port that connects to a SWAN concentrator each time you start the system, unless you are using NonStop TCP/IPv6 over SWAN. (If so, see the manuals that support those TCP/IP subsystems.)

You can create TACL command files to configure TCP/IP stacks on the other ports by assigning the appropriate values the following variables in this example file:

GW^ADDR	LINE^NAME	TCP^CPU2
HOST^NAME	LST^NAME	TCP^NAME
IP^ADDR	TCP^CPU1	TEL^NAME

The NonStop TCP/IPv6 subsystems participate in the system configuration database (however, not with the initial configuration database that is shipped with a new system).

•

•

TCP/IP Configuration and Management Manual

TCP/IPv6 Configuration and Management Manual

HP Integrity NonStop NS-Series Operations Guide—529869-005

16-14