HP NonStop NS manual Logical Processor Reload Parameters

Starting and Stopping the System Reloading Processors

To reload a multiple processors, use the Multi-Resource Actions dialog box (available from the Display menu of the OSM Service Connection):

1.In the Multi-Resource Actions dialog box, select Logical Processor from the Resource Types list. All Logical Processors in the system will be displayed in the right-hand pane.

2.Select Reload from the Action list under Selection Criteria.

3.From the list of Logical Processors, select all the processors and click Add to move them to the lower list (you can select and add one at a time, or Ctrl-click to select more than one).

4.Once all the processors you want to reload are in the lower list, click Perform Action.

5.Click OK to the dismiss the confirmation dialog box.

6.In the Logical Processor Reload Parameters dialog box (See Figure 15-2 on page 15-13),select the appropriate options. See OSM online help for information about the options.

7.Click OK.

8.Check that the reload initiated successfully. From the Low-Level Link, the Processor Status dialog box shows the status for the processor as “Executing NonStop OS.”

Figure 15-2. Logical Processor Reload Parameters

HP Integrity NonStop NS-Series Operations Guide—529869-005

15-13