HP NonStop NS manual SCF Status Line $LHCS6S, Detail, Info Process $NCP, Lineset

Communications Subsystems: Monitoring and	Monitoring Line-Handler Process Status
Recovery

This listing shows that the Expand line-handler process being monitored is up and functioning normally.

The data shown in the report means:

Name	Specifies the name of the object
State	Indicates the summary state of the object, which is either
	STARTED, STARTING, DIAGNOSING (for SWAN concentrators
	only), or STOPPED
PPID	Specifies the primary process ID
BPID	Specifies the backup process ID
ConMgr-LDEV	Contains the LDEV of the concentrator manager process. This
	field applies only to SWAN concentrator lines.

If any state other than STARTED appears, check the meaning of the state in SCF Object States on page 3-14.Depending upon the type of problem, follow your established procedures for problem reporting and escalation.

Examples

To check the detailed status of line $LHCS6S:

> SCF STATUS LINE $LHCS6S, DETAIL

A listing such as this output is sent to your home terminal:

-> STATUS LINE $LHCS6S, DETAIL
PPID	( 3, 24)	BPID	( 2, 24)
State	STOPPED	Path LDEV	50
Trace Status	OFF	Clip Status	UNLOADED
ConMgr-LDEV	49
Path-prim
Path-alter

To display the status of all the Expand lines that are currently active on your system, enter this INFO PROCESS command for the Expand manager process $NCP:

-> INFO PROCESS $NCP, LINESET

HP Integrity NonStop NS-Series Operations Guide—529869-005

6-11