HP NonStop NS manual Using System Status Icons to Monitor Multiple Systems, Attributes Tab

Overview of Monitoring and Recovery Using the OSM Service Connection

Figure 3-3. Attributes Tab

VST312.vsd

Using System Status Icons to Monitor Multiple Systems

When you are monitoring multiple systems, you can create a System Status Icon for each system, allowing you to keep a high-level eye on each system while saving screen space. Figure 3-4 shows three separate System Status icons, each created by:

1.Establishing an OSM Service Connection session to the system.

2.From the Summary menu on the OSM toolbar, selecting System Status.

You can then minimize, but not close, the OSM Service Connection Management window for each system. If the System Status icon for a system turns from green to yellow, as illustrated in Figure 3-4, open the Management window for that system and locate the problem as described in A Top-Down Approach on page 3-7.

Figure 3-4. Using System Status Icons to Monitor Multiple Systems

VST313.vsd

HP Integrity NonStop NS-Series Operations Guide—529869-005

3-10