HP NonStop NS manual System Load Dialog Box, Click Start system

Starting and Stopping the System Performing a System Load

Figure 15-1. System Load Dialog Box

5.From the Configuration drop-down menu under System Load Configuration, select a system load volume. You can select the $SYSTEM, FCDM-Load, SCSI-Load, or an alternate system volume.

6.In the SYSnn field, enter the number of the SYSnn subvolume. The value nn must be a two-digit octal number in the range 00 through 77.

7.In the Configuration File box, select a system configuration file. In most cases, you should select the Current (CONFIG) file.

8.Select or clear the CIIN disabled check box. For a normal system load, check that the CIIN disabled check box is cleared so that the commands in the CIIN file execute.

9.To make changes to the load paths, double-click on a row in the Path window.

10.Click Start system.

HP Integrity NonStop NS-Series Operations Guide—529869-005

15-10