Solution 5: Contact HP support

Solution: Contact HP support for service.

Go to: www.hp.com/support.

If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

Cause: The product had a problem.

Ink service capacity warning

Solution: If you are going to move or transport the product after receiving this message, make sure you keep it upright and do not tip it on its side to avoid ink leakage.

Printing can continue, but ink system behavior might change. Cause: The product has nearly maximized the ink service capacity.

Ink system failure

Solution: Turn off the product, unplug the power cord, and wait 10 seconds. Then, plug the power cord back in and turn on the product.

If you continue to receive this message, write down the error code provided in the message on the product display, and then contact HP support. Go to:

www.hp.com/support

If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

Cause: The printhead or the ink delivery system failed and the product can no longer print.

Check ink cartridges

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Install all four ink cartridges

Solution 2: Make sure the ink cartridges are installed correctly

Solution 3: Contact HP support

Solve a problem

Solution 1: Install all four ink cartridges

Solution: Make sure all of the ink cartridges are inserted. For more information, see:

Replace the cartridges” on page 62

Cause: One or more of the ink cartridges were not installed.

Errors 103

Page 106
Image 106
HP Plus B209 Multifunction Photo CD035A#ABA manual Solution 5 Contact HP support, Ink service capacity warning