![](/images/new-backgrounds/1260073/26007319x1.webp)
Step 1: Connect the printer to the phone line
Before you begin…
Before beginning, be sure you have done the following:
•Installed ink cartridges
•Loaded A4- or
•Have the telephone cord and adapter (if provided with the printer) ready.
For more information, see the setup poster included in the box with the printer.
To connect the printer and any other telephone equipment or devices, complete the following steps:
1.Using the phone cord provided in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled
Note: You might need to use the adapter provided for your country/ region to connect the printer to your telephone wall jack.
Note: If the phone cord that came with the printer is not long enough, you can use a coupler to extend the length. You can purchase a coupler at an electronics store that carries phone accessories. You also need another phone cord, which can be a standard phone cord that you might already have in your home or office. For more information, see the user guide (which is available on your computer after you install the software).
CAUTION: If you use a phone cord other than the one provided with the printer, you might not be able to fax successfully. Because phone cords that you might be using in your home or office can be different from the one provided with the printer, HP recommends that you use the phone cord that is provided with the printer.
2.Connect any other telephone equipment. For more information about connecting and setting up additional devices or services with the printer, see the boxes in this section or see the user guide.
Note: If you need to connect the printer to other telephone equipment and you encounter problems setting up the printer with other equipment
1
1 Telephone wall jack
2
2
8Set up and use fax