3.Find the IP address on the network configuration report.
Printer Status Report
[
[
[
[
[
[
[
[
Install the software
1.Quit all programs on the computer.
2.Install the software from the CD.
3.Follow the onscreen instructions.
4.When prompted, select the Wired Network - Connect the printer to your network using an Ethernet cable. option, and then click the Next button.
5.From the list of available printers, select the printer that has the correct IP address.
6.When the installation is complete, print a page from any program to make sure that the printing software is correctly installed.
Configure IP network settings
View or change network settings
Use the embedded Web server to view or change IP configuration settings.
1.Print a configuration page, and locate the IP address.
●If you are using IPv4, the IP address contains only digits. It has this format: xxx.xxx.xxx.xxx
●If you are using IPv6, the IP address is a hexadecimal combination of characters and digits. It has a format similar to this:
xxxx::xxxx:xxxx:xxxx:xxxx
2.To open the HP Embedded Web Server, type the IP address (IPv4) into the address line of a Web browser. For IPv6, use the protocol established by the Web browser for entering IPv6 addresses.
3.Click the Networking tab to obtain network information. You can change settings as needed.
ENWW | Connect the product to a network | 31 |