HP Q5693A manual Getting started, Mfp

Getting started

After the printer driver is installed, you have to configure the MBM in the printer driver and at the control panel before you can use it.

Whether the MBM is connected to a printer or MFP, an output bin is set to be the first or only bin to receive copies (the copy bin) or print jobs. See the following table for more information about which output bins are designated to received copy and print jobs. For more information, see “Sending a copy job to an output bin that is different from the default” on page 16.

When the MBM	Operational mode		Copy bin	Default output bin	Default output bin
is connected to				for copy jobs	for print jobs
Printer	●	Mailbox mode	(The printer does	(The printer does not	Standard top bin
	●	Stacker mode	not produce	produce copies.)
	●	Job Separator mode	copies.)
	●	Sorter/Collator mode
MFP	Mailbox mode		Not applicable (it	Face-down bin 1	Face-down bin 2
			is always enabled
			in the Mailbox
			mode)
	●	Stacker mode	Enabled (default)	Face-down bin 1	Face-down bins 2
	●	Job Separator mode			through 8
	●	Sorter/Collator mode
	●	Stacker mode	Disabled	Face-down bins 1	Face-down bins 1
	●	Job Separator mode		through 8	through 8
	●	Sorter/Collator mode

6 2 Configuring the MBM for your work environment ENWW