Turning off the designated default output bin for copy jobs

If the MBM is connected to an MFP, the face-down bin 1 is designated for regular copy jobs in the following operation modes:

Stacker

Job Separator

Sorter/Collator

If the copy bin is turned off, regular copy jobs are sent to face-down bins 1 through 8 for the Stacker, Job Separator, and Sorter/Collator modes.

Note

This option does not apply to the Mailbox mode. When the Mailbox mode is used, the face-down

 

bin 1 is always used for copy jobs.

 

 

HP LaserJet 9040/9050 series printers

1Use or to scroll to CONFIGURE DEVICE, and then press .

2Use or to scroll to MBM-8 CONFIG, and then press .

3Use or to scroll to COPIER BIN, and then press .

4Use or to scroll to the option to turn the copy bin on or off, and then press .

HP LaserJet 9040mfp/9050mfp/9500mfp

1Press the MENU button.

2Scroll to and touch CONFIGURE DEVICE.

3Scroll to and touch MBM-8 CONFIG.

4Scroll to and touch COPIER BIN.

5Scroll to the option to turn the copier bin on or off, and then touch OK.

12 2 Configuring the MBM for your work environment

ENWW

Page 20
Image 20
HP Q5693A manual Turning off the designated default output bin for copy jobs, HP LaserJet 9040/9050 series printers