HP Quality Center Synchronizer 1.2 Disconnecting from and Reconnecting to the, Quality Center Synchronizer Server, Connect, Password, Disconnect, Disconnect, Server name, Connection > Disconnect

Chapter 1 • Installing Quality Center Synchronizer

Disconnecting from and Reconnecting to the

Quality Center Synchronizer Server

You can disconnect from the Synchronizer server manually when needed. For example, you may want to connect to a different server. Additionally, if you receive a warning that the Synchronizer client is not connected to the server, you need to manually disconnect from the Synchronizer server. This can occur, for example, after an extended period of inactivity.

After you disconnect from a server, you must connect to another server or reconnect to the same server to continue working with the Synchronizer.

To disconnect from and reconnect to a Quality Center Synchronizer server:

1Select Connection > Disconnect, or click the Disconnect button. The Connect to Server dialog box opens.

2Click the Disconnect button. The Server name and Password boxes become editable.

3Enter the logon credentials as described in step 2 in “Starting the Quality Center Synchronizer Client” on page 27.

4Click the Connect button. The Synchronizer connects to the server you specified and the Synchronizer client opens.

28