HP Quality Center Synchronizer 1.2 manual 87

	Chapter 4 • Working with Quality Center Synchronizer
Field	Description
Endpoint 1 Type	The type of endpoint for Endpoint 1, which must always
	be Quality Center.
Endpoint 2	The type of endpoint for Endpoint 2 and the type of
	entity being synchronized in the endpoint.
Endpoint 2	Settings for the connection to Endpoint 2. The
Connectivity Data	information displayed is dependent on the type of
	endpoint used. For more details on the settings available
	for a particular endpoint, refer to the appropriate
	appendix for that endpoint.
Endpoint 2 Entity	The type of entity being synchronized in Endpoint 2.
Name	Possible values are Requirement and Defect.
Endpoint 2 Type	The type of endpoint for Endpoint 2.
ID	A unique identification number assigned by the
	Synchronizer to the link. This number cannot be
	modified.
Last Full	The result of the last full synchronization run on the link
Synchronization	and the date and time it was run. For more information
	on running full synchronizations, see “Running Link
	Tasks” on page 89.
Last Incremental	The result of the last incremental synchronization run on
Synchronization	the link and the date and time it was run. For more
	information on running incremental synchronizations,
	see “Running Link Tasks” on page 89.
Last Integrity Check	The result of the last integrity check run on the link and
	the date and time it was run. For more information on
	running integrity checks, see “Running Link Tasks” on
	page 89.
Link Description	A description of the link.
Link Name	The name of the link.
Mapped Records	The number of records mapped for synchronization.
Run ID	A unique identification number of the current task run for
	the link. “0” indicates no task for the link is currently
	running.

87