Chapter 3 • Creating Synchronization Links

4Set the e-mail notification settings:

➤In the E-mail address box, type an e-mail address to instruct the Synchronizer server to send e-mail notifications for failed link task runs (and also for task runs that pass with errors if you select the check box below). Only one e-mail address can be specified for each link. The e-mail notifications are sent according to the e-mail settings defined for the Synchronizer server.

➤Select the Send notification when task passes with errors check box to instruct the Synchronizer to send an e-mail notification to the e-mail address listed above when a synchronization task passes with errors.

Setting Adapter Parameters

By default, the Synchronizer supports specific connectivity parameters for each adapter type. An adapter is the endpoint application to which the Synchronizer connects. You can view these connectivity parameters, and the values defined for them, in the Connectivity tab.

If an adapter requires additional parameters, for example, because the adapter was modified, or you are working with an adapter other than the defaults supported by the Synchronizer, these additional parameters are displayed in the Advanced tab.

To define the value for an adapter parameter:

Click the Value cell for the adapter parameter you want to define and enter the parameter value.

82