Chapter 4 • Working with Quality Center Synchronizer

To monitor the progress of a task that is currently running, in the Links list, right-click the link on which the task is running and click View Run. The task’s progress is displayed in the Execution pane. For more information on viewing and managing a task’s progress in the Execution pane, see “Running Link Tasks Manually” on page 91.

Running Link Tasks Manually

You can run a link task manually.

Note: The maximum number of concurrent tasks that can run manually or in automatic mode are as follows:

➤Only one task can run at a time for a particular synchronization link.

➤One full synchronization task or five incremental synchronization tasks from different links can run concurrently.

If the maximum number of tasks are already running, the link task does not run.

To run a link task manually:

1Ensure that the link is enabled. For more information on enabling links, see “Enabling and Disabling Synchronization Links” on page 102.

2In the Links list or Links Grid, perform one of the following actions:

➤To run an integrity check task, select the link on which you want to run the task. Choose Run Task > Run Integrity Check or click the Run button and choose Integrity Check.

➤To run an incremental synchronization task, select the link on which you want to run the task. Choose Run Task > Run Incremental Synchronization or click the Run button and choose Incremental Synchronization.

➤To run a full synchronization task, select the link on which you want to run the task. Choose Run Task > Run Full Synchronization or click the Run button and choose Full Synchronization.

91