Chapter 4 • Working with Quality Center Synchronizer

Editing Synchronization Link Settings

You can edit the settings for a synchronization link.

Note: When you edit the settings for a synchronization link, the link’s state is changed to Unvalidated. You must enable the link before you can run synchronization tasks on it. For more information on enabling links, see “Enabling and Disabling Synchronization Links” on page 102.

To edit synchronization link settings:

1In the Links list, select the link and click the Edit button. The link details are made available for editing.

Note: When editing link settings, you must save the new settings before you can enable the link. For more information on enabling links, see “Enabling and Disabling Synchronization Links” on page 102.

2Edit the configuration settings. A red asterisk next to the link’s icon in the Links list indicates unsaved changes in that link.

Note: You can edit more than one link simultaneously.

For more information on configuration settings, see Chapter 3, “Creating Synchronization Links.”

3 To undo all changes, click the Discard Changes button.

4To save the new configuration settings, click the Save button. Click Yes to confirm. To run the integrity check, click Yes.

99