Reinstalling Software

Before reinstalling any software, first remove it properly using the Windows Add/Remove Programs feature or following the vendor’s specific removal instructions. Refer to the previous section for specific instructions on properly removing the HP OfficeJet R Series software.

To reinstall the HP OfficeJet R Series software, see “” in the HP OfficeJet R Series Setup Guide.

Installing the Office 97 Utility

If you install Office 97 after installing your HP OfficeJet software, you must run a special program before you can scan pictures into these programs using HP ScanPicture. The procedure below explains how to run the utility.

1Insert the HP OfficeJet R Series CD-ROM into your computer’s CD- ROM drive.

2If the HP OfficeJet R Series software installation menu appears, click Quit.

3On the Windows taskbar, click Start, point to Programs, and then choose Windows Explorer.

4Navigate to your CD-ROM drive, open the Utilities folder, and then open the HP ScanPicture Office 97 Patch folder.

5Double-click Setup.exe.

6In the InstallShield dialog box, click Yes to install the Office 97 patch.

7When the installation is complete, click OK.

8Restart your computer.

You will now be able to scan while working in your Office 97 programs.

4-2Adding and Removing Software Programs