![](/images/backgrounds/286148/hp-hp-ux-system-fault-management-sfm-software-users-manual-156082114x1.png)
Troubleshooting SFM
Troubleshooting Indication Providers
If the status displayed is not OK, the provider module is not registered properly. To register the provider module, enter the following command at the
#cimmof
If no errors messages are displayed, the provider module is registered properly. If errors are displayed, restart the CIMOM by entering the following command at the
#cimserver
After the CIMOM restarts, enter the following command at the
#cimmof
After the provider module is registered, create a link between the SFM providers and the CIMOM by entering the following command at the
#ln
To check whether the link is created, enter the following command at the /opt/wbem/providers/lib directory:
#ls
Following is a sample output indicating that the link is created:
# | sys | 30 Jan 12 6:56 |
libsfmproviders.sl
If the link is already present, the following error message appears:
# ln: /opt/wbem/providers/lib/libsfmproviders.sl exists
Cause 3
The provider is not registered under the module.
Solution
To check whether the provider is registered under a module, enter the following command at the
#cimprovider
114 | Chapter 5 |