Installing the SFM Software
Installing the SFM Software from the Web
|
| Installing the SFM Software from the Web |
|
| To install the SFM software from the Software Depot, complete the |
|
| following steps: |
Step | 1. | Go to HP Software Depot at: |
|
| http://www.hp.com/go/softwaredepot |
Step | 2. | Search for SysFaultMgmt. The Overview page is displayed. |
Step | 3. | Go to the Installation page and review Prerequisites to ensure that your |
|
| system meets the requirements. |
Step | 4. | Select the Receive for Free >> option at the bottom right of the page. |
Step | 5. | Select the appropriate release of the |
Step | 6. | Enter your registration information. Read and accept the terms and |
|
| conditions. |
Step | 7. | Click Next >> at the bottom right of the page. |
Step | 8. | Click the appropriate link under Download Software to download the |
|
| software. Save the software in a local directory on your system, for |
|
| example, /tmp/SysFaultMgmt.depot. |
Step | 9. | To install the product, login as superuser and enter the following |
|
| command: |
|
| # swinstall |
|
| For example, |
# swinstall
Step 10. To verify whether the SFM software is installed properly, enter the following command at the
# swlist grep SysFaultMgmt
If the SFM software is installed properly, SysFaultMgmt and the version number appear in the output. If the SFM software is not installed properly, you must repeat the installation procedure. For more information, see “Verifying the Installation” on page 27.
26 | Chapter 2 |