Installing the SFM Software

Verifying the Installation

The Logfile, which includes details about the installation, is displayed. If there are no errors in the Logfile, the SFM software is installed properly. If the SFM software is not installed properly, you must repeat the installation procedure.

Step 3. For information about errors related to installation, enter the following command at the HP-UX prompt:

#swjob -a log <jobid> @ <system name>:/

The jobid is available in the Logfile, as underlined in the Logfile window, in the following figure:

For example, enter the following command at the HP-UX prompt:

#swjob -a log iemlhamia-0013 @ iemlhamia.india.hp.com:/

Verifying the Installation Using the CLI

To verify your installation using the CLI, complete the following steps:

Step 1. Log in to the system as a superuser.

28

Chapter 2