Installing the SFM Software
Configuring Error Logging in SFM
Configuring Error Logging in SFM
You can configure such error logging parameters as severity, location of logs, and the number of backup files using the fmControl command. To configure these parameters, complete the following steps:
Step 1. Modify the /opt/sfm/conf/FMLoggerConfig.xml configuration file using a text editor.
Step 2. Run the /opt/sfm/bin/fmControl /opt/sfm/conf/FMLoggerConfig.xml command for the changes in the /opt/sfm/conf/FMLoggerConfig.xml configuration file to take effect.
For more information about the fmcontrol command, enter man fmControl at the
NOTE | You can configure parameters using the |
| only. |
|
|
Chapter 2 | 41 |