2

Hardware Upgrades

This chapter explains how to access the Evo Workstation W8000 by removing the workstation access panel and front bezel. It also explains how to install the following replacement hardware:

■Memory

■Drives

■Expansion boards

■Processors

Compaq recommends that you finish the setup procedures for the preinstalled software before you install any optional hardware or third-party devices that were not included with your workstation.

Installation Sequence

Follow this sequence of steps to ensure the proper installation of any optional equipment. Before you begin, observe the following precautions:

WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them.

WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug telecommunications/telephone connectors into the network interface controller (NIC) receptacles.

Compaq Evo Workstation W8000 Hardware Reference Guide

2-1