HSM HSM 411.2 Proper use, warranty, Machine components, Safety instructions, Risk of injury

HSM 411.2 Paper shredder

1. Proper use, warranty

The document shredder is to be used for shredding paper. Depending on the cutting type, small quantities of the following materials can also be destroyed:

Shred size (mm)	3.9	5.8	1.9x15	3.9x50
Credit cards	●	●	●	●
CDs	●	●	●	●
Floppy disks	●	●		●
DAT cassettes				●

Its sturdy drive mechanism is not damaged by paper clips and staples. Only on machines with safety level HS Level 6 (1 x 5 mm) can the paper not contain staples or paper clips.

We provide a warranty for the device in ac- cordance with our general sales and delivery terms. This warranty excludes wear, damage due to improper handling, natural depreciati- on, and actions taken by third parties.

2.Machine components

3. Safety instructions

•Read all instructions before start-up of the paper shredder. Save these instructions for later use.

•Follow all warnings and instructions marked on the product!

•Make sure no liquid is spilled on or in the paper shredder.

•If the shredder is damaged or does not function properly, switch the device off, pull out the mains plug and inform our service engineers.

•Keep paper shredder out of the reach of children.

•This shredder should be operated only with an operator in attendance.

Risk of injury!

Do not reach into the paper feed slot.

2 12 3

1

11

10

4

5

I 0

6

7 8

9

Risk of injury from slivers! Splinter protection from the cross cut machines is only gu- aranteed if the safety element is covering the paper feed ope- ning. Feed hard credit cards, CDs, discs or DAT cassettes only into the insertion slot.

Risk of injury by pulling in!

Keep long hair, loose articles of clothing, ties, scarves, jewellery etc. away from feed opening. Material with the tendency to form loops, e.g. tapes, strapping material, etc. must not be shredded.

1	Caution label	8	Bottom frame
2	Inspection door	9	Roller
3	Cover	10	Guide roller
4	Membrane keyboard	11	Door
5	Mains switch	12	Paper feed opening
6	Name plate		Safety element / slinter protection
7	Caution label
0603			english	9