Paper shredder

HSM 411.2

 

 

6. Troubleshooting

Paper jam

You have fed in too much paper.

• Paper shredder jammed.

• Red LED in the key pad flashes.

Paper shredder reverses auto- matically.

Electric motor overheated

• Red LED on membrane key- board lights.

Paper shredder switches off au- tomatically.

Allow paper shredder to cool down for approx. 15 to 20 min.

Pull paper out of the paper fee- ding opening.

If material is not completely pushed out, then

Press dashed arrow button.

Paper is pushed out.

Pull paper out.

The cutting device is easily ac- cessible once the inspection door on the top of the machine is opened.

CAUTION!

Injuries by cutting rollers are pos- sible even when the paper shred- der is idle.

Keep hands away from the cut- ting system!

Separate paper stack and feed paper again.

The shredding process is started again with the green arrow but- ton or by the light barrier (paper feed).

CAUTION !

Do not press dashed arrow but- ton and green arrow button alter- nately forwards and backwards.

Cutting system can be damaged.

Front door or inspection door on the top of the machine is open.

• Red LED on membrane key- board lights.

Paper shredder stops automati- cally.

Close front door and inspection door

If the door is opened when the cutting device is running, the do- cument shredder must be started again using the green button after the door of the document shredder has been closed.

Bag for shredded material full

• Red LED on membrane key- board lights.

Paper shredder stops automatically. Reversing the cutting device (“Reverse” button) is also possib- le even when the shredded mate- rial container is full.

Insert new bag

Particle cutting devices are equipped with a compacting mechanism. Press the foot pedal in the lower part of the cabinet to shake up the collector sack and reduce the volume of the partic- les. Paper can be fed again.

CAUTION!

Empty the shredded material container after the paper shredder has been switched off, because otherwise malfunctions of the cut- ting system could occur when the rocker switch is pressed several times in succession

12

english

0603

Page 12
Image 12
HSM HSM 411.2 operating instructions Troubleshooting, Paper jam, Electric motor overheated, Bag for shredded material full