Humax 525p manual Phone Dialing Options

C h a p t e r 6 M e s s a g e s & S e t u p

In some areas, local and long

®distance toll charges may apply. You are responsible for any telephone charges.

Phone Dialing Options

Change Dialing Options. You can change the following settings (if you make a mistake while entering a change, use the BACK button to backspace):

Set Dial-In Number. Use this to change the number the Recorder uses to make test calls and daily calls. To change it:

1.Select “Set Dial-In Number.” The Area Code screen appears.

2.Use the number keypad on the remote to set the area code, then press SELECT. If you change the area code, or if the Recorder has not connected in the last twenty- four hours, the Update Numbers screen appears and the Recorder calls the TiVo service to retrieve a list of local dial-in numbers. After the phone call, press SELECT. The Dial-In Number screen appears.

3.Use the UP/DOWN arrow to choose one of the listed phone numbers. The Recorder will use this number to connect to the TiVo service. Then press SELECT.

If your area code has no access numbers, press LEFT arrow to return to the Area Code screen and try a nearby area code.

4.The Dialing Format screen appears after you have chosen a dial-in number. You should use this screen to tell the Recorder which dialing format to use. For example: should the dial-in number be preceded by your area code and should a “1” precede the area code? In some areas, even local numbers must be dialed using the area code. Press SELECT to return to the Phone Dialing Options screen.

To test your new dial-in number, select “Test Phone Connection Now.” The Test Phone Connection screen appears and a test phone call begins. When the call

104 TiVo Central Messages & Setup Settings Phone & Network