Humax 525p manual C k P a n e l R e f e r e n c e, 185

B a c k P a n e l R e f e r e n c e

other end of the cable are placed in front of the IR sensor on the cable and/or satellite box. See page 6 for details.

USB. (Universal Serial Bus.) For connecting a USB network adapter. Connecting your Recorder to a home network gives you access to additional features and eliminates the need to connect the Recorder to a phone line. (A phone line is still required for Guided Setup.) See Chapter 7.

Component Video Output. (Connects to TV.) This is the Recorder’s highest quality video output. Use a Component Video cable (not supplied).

Composite A/V Output. (Connects to TV or VCR.) The yellow jack sends video, and the red and white jacks send stereo audio. Use a Composite A/V cable (supplied).

Digital Audio Output. (Connects to A/V receiver.) Use an Optical Digital Audio cable (not supplied) to connect the Recorder to a Dolby Digital compatible A/V receiver.

S-Video Output. (Connects to TV or VCR.) If you use an S-Video cable (not supplied) for video, you will need to connect a separate cable for audio.

S-Video Input. (Connects to cable or satellite box.) The Recorder can receive video from a cable or satellite box with an S-Video output. Use an S-Video cable (not supplied).

Composite A/V Input. (Connects to cable or satellite box.) The Recorder can receive audio and video from a cable or satellite box with Composite A/V output jacks.

RF In. (Connects to cable without a box , or antenna.) Use this jack to connect cable from the wall, or a rooftop or set-top antenna, to your Recorder .

RF Out (Bypass Only). Signals entering the Recorder at the RF In jack are passed through the Recorder to this jack. No TiVo® service functionality is available on the signal from this jack.

A

185