Humax 525p Choosing a Setup Example, O o s i n g a S e t u p E x a m p l e, Recorder is unplugged

C h o o s i n g a S e t u p E x a m p l e

Choosing a Setup Example

The rest of this chapter provides examples for connecting your Recorder to your program source (antenna, cable, or satellite), your TV, and other optional A/V equipment. From the list below, choose a basic setup based on your program source.

After you get your basic system working, connect other equipment (such as a VCR, DVD player, or game console) to additional inputs on your TV or A/V receiver.

Basic Setups: Connect your Recorder to your Program Source and your TV

		Setup 1: Antenna or Cable (No Cable Box)	p. 10
	Your program source is antenna or
	cable with no cable box.
	Your program source is either a cable	Setup 2: Cable or Satellite Box	p. 12
	or satellite box. (If you have both, see
	Setup 4, below.)
	You have two program sources: a	Setup 3: Satellite Box & RF Program	p. 14
	satellite box and an antenna; or a	Source
	satellite box and cable (no cable box).
	You have two program sources: a	Setup 4: Cable Box and Satellite Box	p. 16
	satellite box and a cable box.
Setup Variations: These are variations on the Basic Setups
	Your program source is antenna or	Watching One Channel & Recording	p. 18
	cable (with or without a cable box) and	Another (Antenna or Cable)
	you want to watch one channel while
	recording another.

® Before you begin:

Make sure all your equipment is turned off	1
and the Recorder is unplugged.

The Recorder is not designed to

® support a heavy load, such as a TV.

Your Recorder is only capable of supporting the weight of one or two common A/V components such as VCRs, DVD players, or A/V receivers (provided they have four good, broad, padded feet that distribute of the weight near the corners of the Recorder).

Also, avoid stacking your Recorder on top of other electronic components such as VCRs, A/V receivers, or your TV’s vents.

9