Humax 525p manual Connecting to a Home Network Using Wired Ethernet, 119

Models: 525p

1 202
Download 202 pages 52.15 Kb
Page 127
Image 127

C o n n e c t i n g t o a H o m e N e t w o r k U s i n g W i r e d ( E t h e r n e t )

Connecting to a Home Network Using Wired (Ethernet)

This example shows you how to connect a Recorder to a network hub using a wired (Ethernet) network adapter. You can leave your Recorder plugged in while you connect a network adapter.

To connect a wired (Ethernet) network adapter to your Recorder and your network hub, follow these steps:

Do not use the CDs that are included

®with your network adapters to set up your Recorders. These CDs are intended to load drivers and network adapter software on your personal computer.

USB

ernet

-

 

Eth

 

1.Connect to the Recorder. Connect the USB end of the Ethernet adapter to the USB port on the Recorder.

2.Connect Ethernet to the adapter. Plug one end of an Ethernet cable into the Ethernet adapter.

3.Connect Ethernet to the hub or router. Plug the other end of the Ethernet cable into your home network’s hub or router.

7

119

Page 127
Image 127
Humax 525p manual Connecting to a Home Network Using Wired Ethernet, 119