Humax 525p manual Connecting to a Home Network Using a Wireless Adapter, 117

C o n n e c t i n g t o a H o m e N e t w o r k U s i n g a W i r e l e s s A d a p t e r

Connecting to a Home Network Using a Wireless Adapter

Use this example if you have a home network that includes a wireless access point (WAP) or wireless router, or for each Recorder in a wireless peer-to-peer network. On most home networks, the wireless access point is part of an integrated hub/router and home gateway.You can leave your Recorder plugged in while you connect a network adapter.

To connect a wireless network adapter to your Recorder:

Do not use the CDs that are included

®with your network adapters to set up your Recorders. These CDs are intended to load drivers and network adapter software on your personal computer.

1.Connect to the adapter. If it is not already attached, connect one end of the USB cable that came with your wireless network adapter to the port located on the back of the adapter.

2.Connect to the Recorder. Connect the other end of the USB cable to the USB port on the Recorder. The power light on the wireless adapter may come on before the cable is completely inserted into the USB slot. Make sure you push the cable all the way into the USB slot.

7

The cable may already be attached

®to your wireless network adapter.

117