Humax 525p manual TCP/IP Settings for a Home Network, 124

C h a p t e r 7 C o n n e c t i n g t o a H o m e N e t w o r k

Wireless Encryption. If you entered an alphanumeric password, you will see this screen. Select the level of encryption used by your wireless network. If your network uses 104-bit encryption, select 128-bit encryption. Recorders are not currently compatible with 256-bit encryption.

Confirm Settings. Select “Accept these settings” if they are correct. For steps you can take to troubleshoot issues with your wireless connection, see “Questions About Networking” on page 148.

Change Connection Type. You see this screen if you are not using a shared Internet connection to connect to the TiVo service. If your network has access to an always-on broadband connection, select “Yes” to use it to connect to the TiVo service instead of a phone line.

Next Step. You have completed wireless settings. If your home network has DHCP, and you do not have a DHCP Client ID, the Recorder will automatically complete network setup. We recommend that you confirm the DHCP settings of your network by continuing with “TCP/IP Settings for a Home Network,” below.

If your home network does not have DHCP, or if you have a DHCP client ID, continue with “TCP/IP Settings for a Home Network.”

TCP/IP Settings for a Home Network

You are ready to complete TCP/IP settings if:

•You are connecting your Recorder to your home network wirelessly and have already completed “Wireless Settings for a Home Network” on page 121, or

•You have a wired (Ethernet) adapter connecting your Recorder to your home network.

124