C h a p t e r 8

T r o u b l e s h o o t i n g

 

 

 

3.Check signal strength. On the Phone & Network Setup screen (press the TiVo button to go to TiVo Central, then select Messages & Setup, then Settings, then Phone & Network Setup), check the wireless signal strength.

The following may improve wireless signal strength:

Make sure the wireless adapter is placed well away from the Recorder’s power supply, or power strips, or surge protectors. Any of these may cause interference and reduce signal strength. Some household appliances, such as microwave ovens and 2.4 GHz cordless phones, may also reduce signal strength when they are in use.

Verify that the wireless network adapter’s antenna is fully extended.

Move the wireless network adaptor to a higher position, or give it a better line of sight to your wireless gateway (router).

Reduce the distance between the wireless network adapter and the wireless access point. Wireless networks typically have a range of 100 - 300 feet, but distances can vary based on walls, floors, and other obstructions. It may be necessary to adjust the location adapter of your wireless access point or router to be closer to the network adapter attached to your Recorder(s).

Consider adding a signal booster to your network (available from some wireless equipment manufacturers).

4.Check network name. On the Wireless Settings screen (press the TiVo button to go to TiVo Central, then select Messages & Setup, then Settings, then Phone & Network Setup, then “Edit phone or network settings,” then Wireless Settings), check that the network name (SSID) for your network access point is listed correctly. To change the network name, follow the instructions for completing Wireless Settings at “Wireless Settings for a Home Network” on page 121.

If you haven’t already done so, you should also try the steps in “My Recorder is not connecting to my home network.” on page 150.

152

Page 160
Image 160
Humax 525p manual 152