Humminbird 587ci, 597ci Set Map Offset, Course Projection Line, Press the, Set Map Offset, To change the Map Offset setting:, To change the Course Project Line setting:

Set Map Offset

(Advanced)

Set Map Offset allows you to change the map o ffset used by your Fishfinder. The Se t Map Offset menu opt ion is a vailable when User Mode is set to Advanced (see Main Menu: User Mode).

NOTE: The Map Offset will be applied to all maps and not just the map that requires the correction. The Map Offset should be cleared if a differentmap is to be used.

To change the Map Offset setting:

1.Press the 4-WAY Cursor Control key to activate the cursor and move it to the location where the Map Offset will be applied.

NOTE: The cursor must be active in order for this procedure towork.

2.Make sure the User Mode is set to Advanced, then highlight Set Map Offset on the Navigation main menu.

3.Press the RIGHT Cursor key to set the Map Offset. The Confirm dialog

box wil l a ppear. To conf irm the sett ing, press the RIGHT Cursor key once more. To cancel the setting, press the LEFT Cursor key.

NOTE: If the cursor was not active before you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.

Course Projection Line

Course Projection Line allows you to display or hide an arrow extending from the bow of the boat that projects your current course, and shows where the boat will go if you continue on your present course.

To change the Course Project Line setting:1.Highlight Course Projection Line on the Navigation main menu.

2.Press the LEF T or RIGHT Curs or keys to cha nge the Co urse Projection Line setting. (Hidden, Visible, Default = Visible)

97 Navigation Menu Tab