Husqvarna FS4800D Accessories, Repairs, Spare Parts, Blade Guard Conversion Kits

c)Change the ENGINE GEARBOX PULLEY from 4.50” (114.3mm) diameter to 4.12” (105mm).

d)Shift the GEARBOX SHIFT LEVER (3-2O) from 2 to 1.

e)Verify that machine drive configuration and blade shaft speed corresponds with 20-36 drive configuration information in operation manual.

f)Install the 20-36 drive configuration decals (Decals

542 19 06-00, 542 20 65-46, 542 20 65-49 are required). See the “Decals and Locations” page of this manual for more information.

See Blade Size Conversion charts for specific information.

WARNING: Serious injury can occur to the operator or people in the work area if the rotational speed (n/min) of the DIAMOND BLADE (2E) exceeds the maximum speed (n/ min) marked on the DIAMOND BLADE (2E).

WARNING: After Shifting Gearbox, lower GEARBOX DETENT KNOB (3-2P) or three- speed ENGINE GEARBOX (3-2A) could be damaged!

If gearbox seems hard to shift, a slight movement of the blade shaft may ease movement of GEARBOX SHIFT LEVER (3-2O) into proper gear. Never shift the Gearbox (3-2A) with engine running!

Two Neutral positions are available in the Three Speed ENGINE GEARBOX (3-2A). This gearbox can be shifted into neutral if the blade rotation needs to be eliminated while the engine is running. If the machine is equipped with the optional BLADE CLUTCH (1V), the BLADE CLUTCH SWITCH (1V) can be moved to the “0” (OFF) position to eliminate blade rotation while the engine is running.

15 Accessories

BLADE GUARD CONVERSION KITS:

Use the proper size blade guard for the particular diamond blade size being operated. The following blade guards are available for these diamond blade sizes:

Guard	Blade Sizes
36” (900mm)	24” - 36” (600 - 900mm)
30” (750mm)	18” - 30” (450 - 750mm)
26” (600mm)	14” - 26” (350 - 650mm)
18” (450mm)	14” - 18” (350 - 450mm)
14” (350mm)	14” (350mm)

See Blade Size Conversion charts for specific information.

OPTIONAL KITS:

542 18 11-17* Dual Light Kit

16 Repairs

We carry out all repairs in the shortest possible time and at the most economical prices. (See back page for our address and phone numbers.) Contact you authorized dealer concerning maintenance and repairs.

17 Spare Parts

For quick supply of spare parts and to avoid any lost time, it is essential to quote the data on the manufacturers plate fixed to the machine and the part number(s) and description(s) to be replaced with every order.

Please reference Parts Lists manual (542 20 10-83): (If you do not have a Parts List Manual, please call TOLL FREE 1‑800‑288‑5040 in USA, or for International, call +1-913-928-1300.)

The instructions for use and spare parts found in this document are for information only and are not binding. As part of our product quality improvement policy, we reserve the right to make any and all technical modifications without prior notice.

The manufacturer accepts no responsibility caused by unsuitable use or modifications.

58