PRESENTATION
Cutting height adjustment lever
The cutting height can be adjusted to 5
Never use position S when mowing. This position is for mower deck servicing only.
Lift up the cutting unit before adjusting the height.
Seat
The seat has a jointed attachment on the front edge and can be tipped forward.
The seat can also be adjusted lengthways.
Loosen the bolts under the seat and adjust it forwards or backwards to the desired position.
Fueling
The engine runs on unleaded petrol with a minimum octane rating of 85 (not mixed with oil). We recommend the use of biodegradable alkylate petrol. Do not use petrol that contains methanol.
Do not fill the tank completely, leave an expansion area of at least 2.5 cm (1“).
WARNING! Petrol is highly inflammable.
!Exercise care and refuel outdoors (see safety instructions).
Release lever
The release control must be pulled out in order for the machine to be moved when the engine is shutoff. Pull the controls to the end positions, do not use an intermediate position.
•Pull out the control to disengage the drive system.
•Push in the control to engage to the drive system.
14 – English