| TECHNICAL DATA |
| R 120S |
Dimensions |
|
Length with cutting unit, cm/ft | 229 / 90.08 |
Width with cutting unit, cm/ft | 126,3 / 49.7 |
Height, cm/ft | 108 / 42.7 |
Operating weight with cutting deck, kg/lb | 225 / 496 |
Wheel base, cm/ft | 84 / 33.07 |
Tyre dimensions | |
Air pressure, rear - front, kPa / bar / PSI | 60 / 06 / 8.7 |
Max. gradient | 10° |
Motor |
|
Brand / Model | Briggs & Stratton / 4195 |
Nominal engine output, kW (see note 1) | 11 |
Displacement, cm3/cu.in | 500 / 30.5 |
Max.motor speed, r/min | 3300 ± 100 |
Fuel, minimum octane grade | 87 |
Fuel tank capacity, US pint/litre | 7 / 14.8 |
Oil, class | SAE 5W/30 or SAE 10W/30 |
Oil tank capacity, US pint/litre | 1,4 / 2.96 |
Starting | Electric starter |
Electrical system |
|
Type | 12 V, negative earthed |
Battery | 12 V, 20 Ah |
Spark plug | EMS PLATINUM |
Electrode gap, mm/inch | 0,75/0,030 |
Main fuse | Flat pin, 15 A. |
Transmission |
|
Brand | Tuff torq T36N |
Forward speed, km/h. | |
Reverse speed, km/h | |
Cutting unit |
|
Type | SD 42 |
Cutting width, cm/inch | 107 / 42 |
Cutting heights, 5 positions, mm/inch | |
Blade length, mm/inch | 430/17 |
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned to the dealer or to an applicable station for recycling.
IMPORTANT INFORMATION We reserve the right to change specifications and designs without prior notice so as to implement improvements. Note that no legal claims are valid on the basis of information in this manual. Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.
28 – English
