![Fitting the cutting head](/images/new-backgrounds/93111/9311147x1.webp)
Maintenance
Fitting the cutting head
1 Place the belt under the stay of the cutting deck.
2Make sure the lifting lever comes above the cutting deck grip.
3Fit the cutting deck's pipe together with the deck frame's pipe.
4Push the cutting deck in and make sure the guide bolts fit into the grooves on the deck frame, one on each side.
5 Fit the cutting deck lock.
6 Grab the pipes and push the deck in.
7 Push the deck until you feel the pipes touch bottom.
8 Fit the belt according to the picture.
9 Tension the belt with the belt adjuster.
10Fit the front cover.
11Set the cutting height control to one of the positions
Checking the blades
To achieve the best mowing results it is important that the blades are undamaged and
Check that the blades’ attachment screws are tight.
•Put the unit in the service position, see Service position for the cutting unit.
IMPORTANT INFORMATION
Replacing or sharpening the blades should be conducted by an authorised service workshop.
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting obstacles that result in a breakdown. Let the service centre assess whether the blade can be sharpened or must be replaced.
! | WARNING! Do not use blades that are |
cracked, chipped, or otherwise show signs | |
of damage or severe wear. Replace the | |
| blades. The risk increases if the blades are |
| poorly balanced. |
24 – English