IBM 09N4076 manual One

Step 6. Attaching the cables to the drive

Connect the cables to the CD-RW drive as follows.

1.

If

you

want

to

connect

the

CD-RW

drive

to

your

sound

adapter

or

to

the

sound

function

on

your

system board,

locate

the

included

audio

cables

and

determine

which

cable

best

fits

the

CD

audio-in port

on

your

sound

adapter.

Connect

one

end

of

the

selected

audio

cable

to

the

CD-RW

drive

audio-out

connector

.1/,

and

the

other

end

of

the

cable

to

your

sound

adapter

CD

audio-in

port.

Save

the

other

cable

in

case

you

use

a

different

sound

adapter

in

the

future.

2.

Attach

a

40-pin IDE-cable

connector

.2/

to

the

IDE

connector

on

the

drive.

Align

the

cable

so

that

the

color-coded

edge

is

closest

to

the

power

cable

connector

.3/.

Use

the

IDE

cable

provided

with

this

option

if

there

is

no

cable

attached

to

the

IDE

port

or

if

there

is

only

one

device

connector

on

the

IDE

cable.

If

you

use

the

included

IDE

cable,

attach

one

end

of

the

cable

to

your

system

board

IDE

port

or

to

your

IDE

adapter,

and

the

other

end

of

the

IDE

cable

to

the

CD-RW

drive.

3.

Locate

one

of

the

available

power

cords

attached

to

your

computer

power

source.

Attach

the four-pin

power

cable

.3/

to

the

CD-RW

drive

dc

power

connector.

Step

7. Completing

the

hardware

installation

1.

Be

sure

that

the

drive

is

securely mounted

and

the

connectors are

firmly

attached.

2.

Be

sure

that

the

cables

do

not

interfere

with

the

computer

cover

and do

not block

the power-supply fan

blades or air-flow paths.

3.

Reinstall

the

computer

cover.

4.

Reconnect

all

devices

and

check

any

devices

that

might

have

become

disconnected,

such

as

the

keyboard,

mouse,

and

monitor.

5.

Plug

all

power

cords

into

electrical

outlets.

1-22 IBM 4X/8X/32X CD-ReWritable Internal IDE Option Kit