4. After the guides are adjusted to the correct paper size, insert the paper along those
guides. Make sure the guides are aligned with the correct paper size labels. Paper
is loaded as shown below:
5. Make sure the paper does not exceed the paper limit mark (1). Also check to see
that the paper is under the white retaining clips (2) located on the front and back of
the paper tray.
6. Close the paper tray by sliding the paper tray forward. If you removed the paper
tray completely from the printer, line up the yellow arrow on the paper tray to the
yellow arrow on the printer and slide the paper tray forward.
90 User's Guide